Forklift Attachment Cylinder — Φ70mm, 250mm Stroke

Hook-Lift Truck

Hook-Lift Truck Locking Cylinder — Φ40mm, 200mm Stroke →

Hook-Lift Truck

Hook-Lift Truck Swing Arm Cylinder — Φ160mm, 1925mm Stroke →

Working Principle

Double-Acting Hydraulic Drive

The HCYY11112028 operates on a double-acting hydraulic principle. Pressurised fluid enters through the port on the cap end, pushing the piston rod outward to extend the attachment mechanism — a rotator, clamp, or side-shifter bracket. When the operator commands retraction, the hydraulic pump directs fluid to the rod-end port, and the piston returns with equal control. This bidirectional force ensures precise positioning under load, with the 25 MPa working pressure delivering a net extension force exceeding 90 kN at the piston face. Cushioning grooves machined onto both ends of the piston reduce impact stress at full stroke, extending the service life of seals and end-cap threads significantly beyond that of uncushioned designs common in lower-grade cylinders.

Materials

Precision-Grade Steel Construction

The cylinder barrel is drawn from seamless cold-rolled steel tube, honed internally to an Ra 0.4 surface finish that minimises seal abrasion and prevents micro-leakage under sustained pressure cycling. The piston rod — 32 mm diameter — is machined from 45# high-carbon steel, then hard-chrome plated to a minimum 20 μm depth and polished to Ra 0.2. This treatment delivers a Vickers hardness of 850–900 HV, resisting the corrosion from condensation and mild chemical washdowns common in UK cold-store and food-distribution warehouse environments. End caps are manufactured from ductile cast iron with precision-threaded connections torqued to manufacturer specifications, and the seal assembly uses imported polyurethane and PTFE compounds rated to continuous operating temperatures of -30 °C to +100 °C.

アプリケーションシナリオ

Where This Cylinder Performs

This forklift attachment cylinder is specified across a broad range of UK industrial operations. Distribution centres in the Midlands and South East use it to power paper-roll clamps handling reels up to 3,000 kg. Automotive component plants in the West Midlands rely on it for push-pull attachment systems that handle engine blocks and pressing dies. Port operations at Felixstowe and Southampton fit it to spreader-frame side-shifters for containerised cargo handling. It also finds application in recycling facilities, where bale-clamp attachments cycle hundreds of times per shift under demanding impact loads. The compact 500 mm installation distance allows retrofitting to space-constrained attachment brackets without modifying the hydraulic manifold block or hose routing.

▶

High-Pressure Rating

35 MPa burst-pressure tolerance provides a 40% safety margin above working pressure — essential for systems with pressure spikes during load-shock events.

▶

Compact Installation

500 mm pin-to-pin installation distance fits within the mounting envelopes of most OEM forklift attachment frames, reducing retrofit time and cost.

▶

Hard-Chrome Rod

Hardness of 850–900 HV on the piston rod surface resists scoring from contaminated hydraulic fluid and extends seal service intervals beyond 4,000 operating hours.

▶

Proven Seal System

Imported polyurethane and PTFE seals maintain zero external leakage across the rated pressure range — meeting the fluid containment requirements of UK workplace safety regulation.

▶

Customisation Available

Port size, rod-end thread, clevis dimensions, and stroke length can all be modified to match OEM specifications. Lead times from drawing approval typically run 15–25 working days.

Result: 87% reduction in cylinder-related downtime  |  1.2 million cycles without seal failure  |  ROI achieved in under 4 months

★★★★★

“We source forklift attachment cylinders for clients across the West Midlands automotive supply chain. The HCYY11112028 has become our default specification for clamp and rotator applications. Lead times are reliable, documentation is comprehensive, and we’ve had zero warranty returns in two years.”

— James T., Hydraulic Systems Distributor, Birmingham, UK

★★★★★

“Our port operation at Teesport runs side-shifter attachments seven days a week. We switched to these cylinders after persistent issues with a European supplier. Eighteen months in, performance is excellent. The hard-chrome finish holds up well against the salt-air environment, and the pressure rating gives us the margin we need for heavy container work.”

— Robert A., Fleet Maintenance Manager, Teesport, UK

★★★★★

“We are a recycling plant in South Wales running bale clamp attachments on five reach trucks. The cycle count in our operation is brutal — we’re talking 400 to 500 clamp operations per shift. After 16 months with the HCYY11112028, we’ve had no failures and no leaks. The custom port configuration they supplied to match our existing hose fittings was a bonus — saved us a full day of modification work.”

— Sarah M., Operations Director, Recycling Facility, Cardiff, Wales